As the name suggests is a pug mill factory specializing in the production pug mill machinery manufacturers, let's follow the pug mill manufacturers together to look for safe operation pug mill it: 1. Check the pug mill handling equipment and lifting tools should be in good condition; Check the pug mill with a spiral or helical blade hinge should be firmly mounted card; 2, transportation, loading and unloading of mud handling equipment shall be the person responsible for compliance with lifting and transport safety rules and forbid others to start manipulating manipulation. Hoisting and transport must be on the next process connected; 3, plus mud, clay, mud pressure, Tim mud should be uniform, not wearing gloves to manipulate. Not hand touch and pressure pug pug mill or toward the inside to take the mud. Screw or hinged blades are not allowed in the operation of the toggle plate fin and want to prevent debris from falling into the pug mill; 4, the code may not be in the mud cracked panel. Pug can not cut too long, or the board fender mud section stacking height aspect ratio of not more than 1: 2, and a height of not more than two meters; 5, changing speed or repair pug mill should be required to cut off the power and locked distribution boxes, hanging signs, and removed the clay belt; 6, to comply with the general safety manipulated porcelain work procedures. These are the pug mill manufacturers and share the pug mill safety rules, hoping to be helpful to you, there is need to consult or buy welcome to call our company. This article Source: http: //www.sdhaoweicheng.com